AVR Drone Kit Contents

This page lists the contents of the Bell AVR drone kit necessary for the basic stabilized flight goal

As you read through this page please be sure to refer to the glossary, which contains definitions of many of the components on this page. The Bell AVR drone kit includes all of the components required to build your own autonomous quadcopter. The kit provides a frame, motors, electronic speed controllers, flight controller, and several additional peripherals. This section will cover a majority of the components included for basic assembly of the drone.


Boxes in AVR Kit

The AVR kit will contain the following boxes. Be sure to read the label on each box to gain a high level understanding of the components inside.

AVR kit boxes from first shipment

AVR kit boxes from first shipment

Components for Basic Drone Assembly

The photo below shows the main components necessary for the first phase of the build, which consists of assembling the drone hardware, configuring the flight controller, and becoming familiar with manual, stabilized flight.

AVR kit components for manual flight

AVR kit components for manual flight

Components for Advanced Drone Assembly

In the second phase of the build you will be adding several peripherals to your AVR drone, installing software, and configuring parameters for better performance. These modifications will allow you to fly in a mode known as “Position Hold” where the drone will maintain position and altitude. This will lead to a much better experience when it comes to competition day.

AVR kit components for position hold flight

AVR kit components for position hold flight


Next
Last modified August 23, 2023: Rohns changes (be85008)