- AVR-GIMBAL-BASE (x1)
- STL file: AVR-GIMBAL-BASE.stl
- STEP file: AVR-GIMBAL-BASE.stp
- AVR-GIMBAL-PAN (x1)
- STL file: AVR-GIMBAL-PAN.stl
- STEP file: AVR-GIMBAL-PAN.stp
- AVR-GIMBAL-TILT (x1)
- STL file: AVR-GIMBAL-TILT.stl
- STEP file: AVR-GIMBAL-TILT.stp
An infill of 15% should be sufficient for these parts.