Gimbal

  less than a minute  

• AVR-GIMBAL-BASE (x1)
  • STL file: AVR-GIMBAL-BASE.stl
  • STEP file: AVR-GIMBAL-BASE.stp
• AVR-GIMBAL-PAN (x1)
  • STL file: AVR-GIMBAL-PAN.stl
  • STEP file: AVR-GIMBAL-PAN.stp
• AVR-GIMBAL-TILT (x1)
  • STL file: AVR-GIMBAL-TILT.stl
  • STEP file: AVR-GIMBAL-TILT.stp

An infill of 15% should be sufficient for these parts.

←Previous Next→